• 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    UN-3845 CF AR+
  • 2 Body Bed Maker (SB) Image
    Chateau-Style Ploughs
  • 2 Body Bed Maker (SB) Image
    Chateau-Style Ploughs
  • 2 Body Bed Maker (SB) Image
    Chateau-Style Ploughs

4 Body CF AR+

Enquire About This Product

THE PROCESS
The 4 body centre-folding AR+ bed maker is designed to go into pre-cultivated ground, both to create beds for destoning and aerating the soil. It is key for the bed maker to get as much soil as possible out of the trench and into the bed. This gives the destoner the maximum potential.

  •    UN-3845 CF AR+     4 Body Centre-Folding AR+ (Non Stop)
Full Product Description
AR+ Models

The ScanStone AR+ models negate the need for additional shearbolt protection. This auto reset system has a double pivot point allowing the beam to pivot and also the body to pivot as the plough strikes a stone or tree root. There is enough stroke in the hydraulic cylinder for the plough to reset in both instances and enough pressure in the accumulator for the plough to reset back to the preset depth.

Track Width Setting

Distance between centre to centre of plough.

•     SET-001      1.50 m
•     SET-002      1.60 m
•     SET-003      1.65 m
•     SET-004      1.70 m
•     SET-005      1.80 m     (Default)
•     SET-006      1.85 m
•     SET-007      2.00 m

Classic Style Ploughs

Leave a wide bottom trench for the stones and clods to lie in. Leaves a bed that is quicker to dry

•     KIT-1100     Classic Style Ploughs     (Standard)

Chateau Style Ploughs

Different shape of body to leave a steeper trench. 

•     KIT-1116      Chateau Body for AR+      (Option)

Disc Style Hydraulic Marker Kit

Disc-style markers leave an accurate scribe in the soil giving the operator a useful guide on his return journey up the field, when not using GPS.

•     KIT-1084      Pair     (Option)

Point Style Marker Kit

Point-style markers are a less expensive option and virtually maintenance-free. Mainly used to assist the operator should be GPS fail.

•     KIT-1081      Pair     (Option)

Hydraulically Extendable Marker Kit

In conditions where GPS coverage may be limited, the hydraulic extendable markers provide centre marking while operating the ScanStone 4 body bed former with 4 ploughs down. Comes with a choice of disc or point.

• BOM-0337     Pair     (Option)

Stabiliser Fins

Stabiliser fins act as as rudder to the plough to improve stability during work. Fins are not compatible with Chateau ploughs.

•     KIT-1102      Stabiliser Fins      (Option)

Manual Depth Wheel Kit

To act as a depth guide and keep the ploughs from digging in too deep.

•     KIT-1122      18”     (Standard)

Hydraulic Depth Wheel Kit

To act as a depth guide and keep the ploughs from digging in too deep.

•     BOM-1123      18” in lieu     (Option)

Parallel Linkage Kit

For keeping the ploughs level when working in half depths.

•     BOM-0315     Parallel Linkage     (Option)

 

Large Tail Pieces

Attached at the top of the mouldboard, the tail pieces keep the side wall of the bed in position in deeper and heavier conditions. Not compatible with Chateau ploughs.

•     BOM-0371     Large Tail Pieces (Pair)     Option

Easy Duty Cultivator Tines

To break up the soil before the ploughs engage.

• KIT-1114      Each     (Option)

Heavy Duty Cultivator Tines

To break up the soil before the ploughs engage.

•     KIT-1130      Each     (Option)

Toolbox

Useful for storing tools, spare parts and other maintenance essentials.

•     BOM-0319     (Option)

Unique Parts List

Each individual bed former comes as standard with a unique parts manual which features the exact specifications and equipment which is mounted on the machine before it leaves the factory. Customers are able to quote their serial number to their parts provider, to ensure that the correct parts are ordered. Not only does this speed up the ordering process, but avoids mistakes.

User Manual / Machine Stickers

The country of use kit consists of a hard-copy of the user manual and machine stickers in the country’s spoken language.

•     English      (Standard)
•     French

Home Background Image
Interested in becoming a trade customer?

Discover how we established a first class reputation for reliability in a vast variety of soil conditions both at home in the UK, and in countries throughout the world.